Creat a text file for windows 2012 dhcp assign ip to mac address

#Creat a text file for windows 2012 dhcp assign ip to mac address mac

And in /interface bridge nat, no action supports change or assignment of VLAN ID. On 2011, switch rules with very few actions work only on the ports server by the 8327 switch chip, but that doesn't help in your case as this chip doesn't support assignment of new-vlan-id.

#Creat a text file for windows 2012 dhcp assign ip to mac address mac

If in fact switch rules don't work on this model of router, is there a way to tag packets from a specific MAC address(es) with a VLAN id? Looking at the docs and winbox, a switch rule should solve my problem and let me force the destination VLAN id, but these rules don't work on the RB2011 series. Problem is, the device almost always ignores this and pulls a DHCP address from the bridge rather than using the statically allocated address from the VLAN DHCP pool.

I tried making the IP address associated with the MAC address static and using an address from the VLAN pool.

The Unifi APs are working smoothly with the VLANs but I need to force a couple of MAC addresses that are wired to the switch and not through the Unifi to be associated with the VLAN and not the bridge.

There are three VLANs associated with this bridge and this bridge spans multiple ethernet ports (each VLAN has its own DHCP server too). My config is a bridge (with DHCP server) where some Unifi access points connect along with a variety of devices that plug into a switch (the switch can forward VLAN tags but can't tag ports). I need to associate a MAC address with a specific VLAN ID.